NANLITE FC-300B - Page 28

WWW.NANLITE.COM
27
③FLASH
Rotate the right knob to select DIM, CCT, G/M, INTERVALS (range: 0.1s-10.0s) or FLASH RATIO
(range from: 0% -100%), and rotate the left knob to set the corresponding parameters.
Rotate the right knob to select DIM, CCT, G/M, INTERVALS or FLASH RATIO.
Rotate the left knob to set the corresponding parameters.
EFFECT MODE
CH: 512
EFFECT: FLASH
SMART
DIM: 100%
CCT: 5600K
INTERVALS: 1s
FLASH RATIO: 50%
EFFECT MODE
CH: 512
EFFECT: FLASH
SMART
DIM: 100%
CCT: 5600K
INTERVALS: 1s
FLASH RATIO: 50%
EFFECT MODE
CH: 512
EFFECT: FLASH
SMART
DIM: 99%
CCT: 5600K
INTERVALS: 1s
FLASH RATIO: 50%
EFFECT MODE
CH: 512
EFFECT: FLASH
SMART
DIM: 100%
CCT: 5600K
INTERVALS: 1s
FLASH RATIO: 50%