EasyManua.ls Logo

NANO NDL-090 - User Manual

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
User guide
heatless desiccant air dryer
revision: 2022-116 document: 17-100-0120
© 2022 Air & Gas Solutions LLC.
www.n-psi.co.uk

Other manuals for NANO NDL-090

Questions and Answers

  • J
    Jennifer LyonsAug 9, 2025
    What to do if my NANO Dehumidifier is not cycling?
    • C
      Chad FergusonAug 9, 2025
      If your NANO Dehumidifier isn't cycling, first ensure the controller is powered and check the on-screen column status to confirm it's powering the solenoid valves during normal operation. Also, check the power to the unit and the fuse (T2A 250V) located at Fig 8.A. Insufficient inlet pressure could also be the culprit; ensure it's at least 4 barg and adjust the inlet pressure settings if needed. A failure to de-pressurize during cycling could indicate a solenoid valve malfunction. If the coil has power, replace the valve. A working valve should produce an audible click when energized. Finally, check the inlet air supply if the outlet flow stops.
  • K
    Kenneth GriffinAug 19, 2025
    Why does my NANO NDL-090 have poor dew point performance?
    • J
      Jeffrey Farmer Jr.Sep 12, 2025
      If your NANO Dehumidifier shows poor dew point performance, start by checking the inlet pressure; it should be a minimum of 4 barg. Adjust the inlet pressure settings if necessary. Ensure the power is on, the dryer front panel is illuminated, and the dryer is cycling correctly. If the desiccant is moist or contaminated, identify and eliminate the source of contamination and replace the cartridges, avoiding reuse. Confirm that the dryer's performance matches the required system air consumption. Verify the inlet air temperature against the technical specifications. Insufficient purge air can also cause this issue; consult service personnel to adjust the settings, as they are factory pre-set. Lastly, a blocked exhaust silencer may be the cause, requiring assistance from service personnel.
  • M
    Morgan Choi MDAug 28, 2025
    What to do if my NANO NDL-090 Dehumidifier has constant depressurization?
    • S
      Scott CobbAug 28, 2025
      If your NANO Dehumidifier is constantly depressurizing, try switching it off and restarting it. Make sure the dryer is pressurized before powering it on to allow it to initialize before starting operation. Erratic airflow from the exhaust may indicate a faulty or damaged valve, requiring service.

Summary

General Information and Support

Manufacturer Contact and Support

Contact details for nano-purification solutions in key regions for support.

Product Warranty Information

Outlines the 2-year manufacturer's warranty terms and conditions.

Safety Precautions and Warnings

Crucial safety warnings, including avoiding modifications and adhering to regulations.

Product Intended Use and Conditions

Defines the product's specific application and operating conditions.

Technical Specifications

System Integration Layout

Illustrates the recommended integration of the dryer within a compressed air system.

Operating the Dryer

Step-by-step instructions for starting, running, and grounding the dryer unit.

Safe Dryer Shutdown Procedure

Safe steps to follow for isolating and depressurizing the dryer.

Performance Monitoring and ES Settings

Maintenance and Cleaning

Service Schedule and Intervals

Troubleshooting Guide

Dew-point Performance Issues

Lists common causes and solutions for performance issues related to dew-point.

Dryer Cycling Failures

Identifies potential reasons and fixes for the dryer not cycling correctly.

NANO NDL-090 Specifications

General IconGeneral
BrandNANO
ModelNDL-090
CategoryDehumidifier
LanguageEnglish

Related product manuals