NanoCam Plus NCP-DVRT1 - Set Date;Time

12
2.7.8 Park Mode
Park Mode watches over your parked vehicle and will trigger a recording when an impact is detected.
1. Press the
(OK) Button to stop the Car DVR from recording.
2. Press the
(Menu) Button to enter the Settings Menu.
3. Use the
and Buttons to navigate the Settings Menu and highlight the Park Mode setting and press (OK) to
select.
4. Use the
(OK) Buttons to turn OFF and ON Park Mode indicated by the check box.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2.7.9 Set Date/Time
Setting the Time and Date allows you to stamp your footage with the time as a reference.
1. Press the
(OK) Button to stop the Car DVR from recording.
2. Press the
(Menu) Button to enter the Settings Menu.
3. Use the
and Buttons to navigate the Settings Menu and highlight the Date setting and press
OK
to select.
4. Use the
and Buttons to cycle the highlighted field, then press the
(Mode) button to confirm and highlight the next
field.
5. Once you have entered the current time and date, press the
(Menu) button to save and exit the Date setting.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Once the time and date is set it can be stamped onto your footage using the Date Stamp setting. Please see section Date Stamp
for more details.
2.8.0 Language
The Language setting is used to select your preferred Language in the menus. To set the systems language follow the
instructions below.
1. Press the
(OK) Button to stop the Car DVR from recording.
2. Press the
(Menu) Button to enter the Settings Menu.
3. Use the
and Buttons to navigate the Settings Menu and highlight the Language setting and press (OK) to
select.
4. Use the
and Buttons to highlight your required language, then press the (OK) button to confirm your selection.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
12