13
2.8.1 Date Stamp
Date stamp will stamp the current date and time onto the footage for future reference. To set the date stamp please follow
the instructions below.
1. Press the
(OK) Button to stop the Car DVR from recording.
2. Press the
(Menu) Button to enter the Settings Menu.
3. Use the
and Buttons to navigate the Settings Menu and highlight the Date Stamp setting and press (OK) to
select.
4. Use the
(OK) button turn off and on Date Stamp indicated by the check box.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
3. For instructions on how to set your DVR's internal clock, please see the section named Set Date/Time (2.7.9).
2.8.2 Format
Formatting the Micro SD card will delete all information on the inserted Micro SD Card and prepare the card for use with the
Car DVR.
1. Press the
(OK) Button to stop the Car DVR from recording.
2. Press the
(Menu) Button to enter the Settings Menu.
3. Use the
and Buttons to navigate the Settings Menu and highlight the Format setting and press (OK) to select.
4. Select Confirm and press the
(OK) button.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
2. Formatting your Micro SD Card will delete all files from the card. Once these files have been deleted you will not be able to recover
them.
2.8.3 Default Settings
Default Settings is used to revert the Car DVR's settings to their default settings. To reset the camera to restore the default
settings, please follow the instructions below.
1. Press the
(OK) Button to stop the Car DVR from recording.
2. Press the
(Menu) Button to enter the Settings Menu.
3. Use the
and Buttons to navigate the Settings Menu and highlight the Default Settings setting and press (OK)
to select.
4. Select Confirm and press the
(OK) button.
Note:
1. Menus cannot be accessed while the camera is recording. Please stop the recording before attempting to access the menu.
To Next Page
Loading...
