NAPCO GEM-K4 - Function Menu; Activate Telephone Test?; Delay Arming 1-4 hours.

18
FUNCTION MENU
15. Activate Telephone Test? (Telephone Test programmed? YES NO). Sends a
communicator test to the central station. A communication failure will be indicated at the
keypad by a system trouble “E03-00” display. Repeat the test to attempt to correct a
communication failure, as any successful communication will clear this display.
16. Delay Arming 1-4 hours. (Not for UL-listed systems). Your system may be set to
arm automatically after a delay period of 1 to 4 hours.
To Delay Arm the system:
• With Function 16 in the window, enter the desired Delay Arming time in hours (1,
2
, 3,or 4), followed by U.
At the end of this 1 - 4 hour Delay Arming period, the siren will sound a 2-second warning
and the keypad will begin a 15-minute arming countdown with the sounder pulsing. The
sounder may be silenced at this time by pressing
C, but it will turn back on with a
steady warning tone 1 minute prior to arming, at which time the building must be exited.
The same steps can be used to delay a scheduled Auto Arming, if your system has been
programmed as such.
CHIME
15
CHIME
16