NAPCO GEM-K4 - Function Menu; Activate Program?; Activate Download? (For installers use only); Relay Control?

19
FUNCTION MENU
17. Activate Program? Activates the Program Mode from Keypad No. 1. Note: This
feature is disabled while armed. (See PROGRAMMING USER CODES).
18. Activate Download? For installer's use only. If accidentally enabled, press C
to exit. Note: This feature is disabled while armed.
19. Relay Control? (Relay Control programmed? YES NO).
Turns ON or OFF one or more programmed Relay Group. Press U to turn the displayed
group on or off; press NEXT(
P) to proceed to the next group, or PRIOR (Q) to
scroll back to the previous group. Press C when done.
• Relay Group 01: [ ____________________________________ ]
• Relay Group 02: [ ____________________________________ ]
• Relay Group 03: [ ____________________________________ ]
• Relay Group 04: [ ____________________________________ ]
• Relay Group 05: [ ____________________________________ ]
• Relay Group 06: [ ____________________________________ ]
• Relay Group 07: [ ____________________________________ ]
• Relay Group 08: [ ____________________________________ ]
CHIME
17
CHIME
18
CHIME
19