EasyManua.ls Logo

NAPCO GEM-K4 - System Trouble Error Codes; E-11-NN Keypad Tamper; E-13-NN Expansion Module Tamper; E-15-NN RF Transmitter Tamper

NAPCO GEM-K4
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
Trouble
Indication
System Trouble
Condition
Action
E-11-NN
Keypad Tamper A keypad has been removed for the wall. Call installing company for service if problem cannot be
repaired.
E-12-NN
Expansion Zone
Module Response
Failure
Call installing company for service.
E-13-NN
Expansion Module
Tamper
The cover has been removed from a zone expansion module. A problem has been detected with an
Expansion Module. Call installing company for service.
E-14-NN
Relay Board Response
Failure
NN= Relay Board Number. Call installing company for service.
E-15-NN
RF Transmitter Tamper Wireless Transmitter Tamper Cover removed. NN=Transmitter Number. Call installing company for
service.
E-16-NN
Wireless Receiver Jam A problem has been detected with the wireless receiver. Call installing company for service.
E-17-NN
Receiver Tamper
Condition
Call installing company for service.
E-18-NN
KeyFob Transmitter
Low Battery
The batteries (2) in the wireless KeyFob transmitter indicated are low and should be replaced. The
replacement battery is the #386 watch battery.
Warning: Replace batteries only with the same type as specified above. Use of another battery may
present a risk of fire or explosion. Do not recharge or disassemble battery, or dispose of in fire.
SYSTEM TROUBLE ERROR CODES

Related product manuals