EN
W415-2759 / B / 10.21.20
11
operating your appliance
L
O
H
I
Flame adjustment
Manual adjustments to your fi replace must only be made when the appliance is off and complete cool.
Allow safety barrier to cool before making adjustment.
The BL36-1/BL46 models are equipped with a manual gas control knob (located on the valve) that adjusts the
fl ame height to suit your preference. To access the gas control knob, remove your safety barrier, control cover and
door trim (see “maintenance” section for instructions on how to remove these components.
Use only your hand to turn the gas control knob (never use tools). If the knob will not turn by hand, do not try to
repair it. Contact a qualifi ed technician.
2.4.2 turndown
An optional remote control is available to turn the appliance on and off and to adjust the fl ame height without the
need to remove the safety barrier, refer to the instructions provided with the remote control.
To Next Page
Loading...
Need help?
General
