W415-0702 / B / 04.04.12
36
9.0 NORMAL OPERATING SOUNDS
*
* NOTE: "Quiet Mode" (NPS45 Only) This feature disables the convection blower when the stove is in pilot/
standby mode regardless of control setting. The blower will activate during ignition to cool components then it
will shut-down again. When ignition cycle is complete, if stove is in heat level #1, the blower will shut-down. If
the blower is running in heat levels #2 - #5 and the appliance is adjusted to heat level #1, the blower will stay
on until the components cool down, the same applies in T-STAT mode.
To Next Page
Loading...
