N415-0437CE-GB-DE OCT 23.17
WARNING! When reinstalling the
burner aer cleaning it is very important
that the valve/orice enters the burner
tube before lighng your gas grill. If the
valve is not inside the burner tube a re
or explosion could occur.
WARNING! Hose: Check for abrasions, melng, cuts, and cracks in the hose. If any of these
condions exist, do not use the gas grill. Have the part replaced by your Napoleon Grill dealer or
qualied gas installer.
Cast Aluminum Lid: Your grill is equipped with a cast aluminum lid which will not rust and can easily be
renished. The inside of the lid is raw aluminum, ow marks and releasing agent marks may be present,
this is not a defect but marks from the mold which is used in the manufacturing process.
Clean the lid periodically with warm soapy water. Although cast aluminum will not rust, high temperatures
and weathering can cause oxidaon to occur on aluminum surfaces. This appears as white spots on
the casng. To renish these areas, clean rst and sand lightly with ne sandpaper. Wipe the surface to
remove any residue and paint with high temperature barbecue paint. Protect surrounding areas from
over-spray. Follow the manufacture’s direcons for curing.
To Next Page
Loading...
Need help?
General