EasyManuals Logo

Napoleon PRO285X Instructions

Napoleon PRO285X
40 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #13 background imageLoading...
Page #13 background image
13
EN
www.napoleongrills.com
N415-0437CE-GB-DE OCT 23.17
Troubleshoong
Problem Possible Causes Soluon
Low heat / Low ame
when valve turned to
high.
Blockage of gas.
Improper preheang.
Check for spider webs in the burner or orice.
Preheat grill with main burners on high for 5 to 10
minutes.
Excessive are-ups/
uneven heat.
Improper preheang.
Excessive grease and ash build up
in drip pan.
Preheat grill with both main burners on high for 5 to
10 minutes.
Clean drip pan regularly. Do not line pan with
aluminum foil. Refer to cleaning instrucons.
Burners burn with
yellow ame,
accompanied by the
smell of gas.
Possible spider web or other
debris, or improper air shuer
adjustment.
Thoroughly clean burner by removing. See general
maintenance instrucons. Open air shuer
slightly according to combuson air adjustment
instrucons. (This must be done by a qualied gas
installer.)
Flames li away from
burner, accompanied
by the smell of gas, and
possibly dicules in
lighng.
Improper air shuer adjustment. Close air shuer slightly according to combuson air
adjustment instrucons. (This must be done by a
qualied gas installer.)
Burner will not light
with the igniter, but will
light with a match.
Jet-re outlet is dirty or clogged.
Clean jet-re outlet with a so bristle brush.
Humming regulator. Normal occurrence on hot days. This is not a defect. It is caused by internal
vibraons in the regulator and does not aect the
performance or safety of the gas grill. Humming
regulators will not be replaced.
“Paint” appears to be
peeling inside lid or
hood.
Grease build-up on inside surfaces. This is not a defect. The peeling is caused by
hardened grease, which dries into paint-like shards
that ake o. Regular cleaning will prevent this. See
cleaning instrucons.
Burner output on
“high” seng is
too low. (Rumbling
noise and uering
blue ame at burner
surface.)
Lack of gas.
Supply hose is pinched.
Dirty or clogged orice.
Spider webs or other maer in
venturi tube.
Check gas level in propane cylinder.
Reposion supply hose as necessary.
Clean burner orice.
Clean out venturi tube.

Other manuals for Napoleon PRO285X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Napoleon PRO285X and is the answer not in the manual?

Napoleon PRO285X Specifications

General IconGeneral
BrandNapoleon
ModelPRO285X
CategoryGrill
LanguageEnglish

Related product manuals