Troubleshoong
Problem Possible Causes Soluon
valve turned to high.
procedure.
on slowly to allow pressure to equalize. See
Preheat grill with both main burners on high
for 10 to 15 minutes.
heat.
Sear plates installed incorrectly.
Excessive grease and ash build on
sear plates and in drip pan.
Ensure sear plates are installed with the holes
Preheat grill with both main burners on high
for 10 to 15 minutes.
Clean sear plates and drip pan regularly. Do
not line pan with aluminum foil. Refer to
Burners burn with yellow
smell of gas.
Possible spider web or other
adjustment.
Main burner will not light
with the igniter, but will light
with a match.
Normal occurrence on hot days.
the performance or safety of the gas grill.
Burners will not cross light
each other.
Dirty or corroded cross light
Clean or replace as required.
inside lid or hood.
Grease build-up on inside
surfaces.
peeling is caused by hardened grease, which
Regular cleaning will prevent this. See cleaning
Supply hose is pinched.
venturi tube.
state.
Clean out venturi tube.
on slowly to allow pressure to equalize. See
To Next Page
Loading...
Need help?
General