To Next PageTo Next PageWhy does my Napoleon TQ285 Grill have low heat or low flame on high?
Low heat or low flame when the valve is turned to high on your Napoleon Grill can be caused by a blockage of gas or improper preheating. Inspect the burner and orifice for spider webs. Preheat the grill with the main burners on high for 5 to 10 minutes.
Why is "paint" peeling inside my Napoleon TQ285 Grill lid?
If you observe what appears to be “paint” peeling inside the lid or hood of your Napoleon Grill, this is not a defect. It's caused by hardened grease that dries into paint-like shards and flakes off. Regular cleaning will prevent this. Consult the cleaning instructions for guidance.
General| Fuel Type | Propane |
|---|---|
| Dimensions | 47.75 in (121.5 cm) L x 20.25 in (51.5 cm) D x 15.25 in (39 cm) H |
| Weight | 32 lbs (14.5 kg) |
| Burner Material | Stainless Steel |
| Cooking Area | 285 sq. in. |
| BTU | 12, 000 BTU |
| BTU Output | 12, 000 BTU |
| Ignition | Instant JETFIRE™ Ignition |
Actions to take if gas odor is detected.
Precautions before lighting and storing flammable liquids.
Essential rules for safe grill operation and placement.
Instructions for connecting and handling gas cartridges and hoses.
Safety measures during grilling, like supervision and handling hot surfaces.
Step-by-step guide for performing gas leak tests.
Identifying leaks with soap solution and steps for repair.
Steps for safely igniting the main burners.
Warnings about using the grill under awnings and during storage.
Guidance on preheating, searing, and cooking methods.
Recommendation for annual servicing and safety precautions.
How to clean and maintain the burner.
Critical steps for reinstalling the burner to prevent hazards.
