Why is the auger blade not spinning in my Narvon Dispenser?
If your Narvon Dispenser's auger blade isn't spinning and the bowl isn't frozen, first ensure the master power switch is "ON". Next, check that the auger switch is "ON", in the "I" position, and that the "I" "FROZEN" option is selected on the drink type switch. Finally, make sure the thickness control is adjusted correctly.
What to do if Narvon Dispenser bowl is frozen but auger not spinning?
If your Narvon Dispenser's bowl is frozen and the auger isn't spinning, make sure the thickness control is adjusted correctly.
Why is my Narvon Dispenser so loud?
If your Narvon Dispenser is very loud inside, ensure the condenser coil is clean and that the unit has proper ventilation. Also, make sure the unit is not leaking inside.
How to fix the LED light in the lid of Narvon Dispenser?
If the LED light in the lid of your Narvon Dispenser is not on, ensure the master power switch and the master light switch are both "ON".
Explains the primary switches for power, lighting, and beverage selection.
Essential safety precautions for installation and operation.
Steps for making frozen beverages and preparing cold drinks.
Detailed instructions for reassembling the bowl, lid, and dispensing tap.
General| Brand | Narvon |
|---|---|
| Model | 378SM261 |
| Category | Beverage Dispenser |
| Language | English |
To Next Page
