National Instruments 9401 User Manual

Cable Requirements for EMC Compliance
Select and install cables for the NI 9401 in accordance with the
following requirements:
• Install a clamp-on ferrite bead (782803-01) on the cable that
you are connecting to NI 9401.
• The clamp-on ferrite bead must be connected to the cable as
close to the module as possible. Placing the ferrite elsewhere
on the cable noticeably impairs its effectiveness.
8 | ni.com | NI 9401 Getting Started Guide

National Instruments 9401 Specifications

General

Brand	National Instruments
Model	9401
Category	I/O Systems
Language	English