National Instruments 9401 User Manual

Figure 1. Installing a Ferrite Bead
1 2
1. Installing a ferrite bead on a 25-pin DSUB cable.
2. Installing a ferrite bead on the cable of the terminal block.
Special Conditions for Marine Applications
Some products are Lloyd’s Register (LR) Type Approved for
marine (shipboard) applications. To verify Lloyd’s Register
certification for a product, visit ni.com/certification and search
for the LR certificate, or look for the Lloyd’s Register mark on
the product.
NI 9401 Getting Started Guide | © National Instruments | 9

National Instruments 9401 Specifications

General

Brand	National Instruments
Model	9401
Category	I/O Systems
Language	English