National Instruments NI 9375 User Manual

1 2 3
1. Insert the screwdriver into a spring clamp activation slot to
open the corresponding connector terminal.
2. Press a wire into the open connector terminal.
3. Remove the screwdriver from the activation slot to clamp the
wire into place.
16 | ni.com | NI 9375 Getting Started Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

National Instruments NI 9375 Specifications

General

Brand	National Instruments
Model	NI 9375
Category	I/O Systems
Language	English