National Instruments NI 9871 - Electromagnetic Compatibility (EMC)

Withstand
up to 2,000 m in
altitude
1000 V
rms
verified by a 5s
dielectric withstand test
up to 5,000 m in
altitude
500 V
rms
verified by a 5s
dielectric withstand test
Safety and Hazardous Locations Standards
This product is designed to meet the requirements of the
following electrical equipment safety standards for measurement,
control, and laboratory use:
• IEC 61010-1, EN 61010-1
• UL 61010-1, CSA 61010-1
• EN 60079-0:2012, EN 60079-15:2010
• IEC 60079-0: Ed 6, IEC 60079-15; Ed 4
• UL 60079-0; Ed 5, UL 60079-15; Ed 3
• CSA 60079-0:2011, CSA 60079-15:2012
Note For UL and other safety certifications, refer to
the product label or the Online Product Certification
section.
NI 9871 Getting Started Guide | © National Instruments | 19