Index
I-4 | ni.com
single semi-period, 5-9
single two-signal edge-separation, 5-22
two-signal edge-separation, 5-21
using quadrature encoders, 5-19
using two pulse encoders, 5-21
measuring
high frequency with two counters, 5-12
large range of frequencies using two
counters, 5-12
low frequency, 5-11
minimizing glitches on the output signal, 3-6
mounting, 1-16
desktop use, 1-17
DIN rail, 1-23
panel/wall, 1-17
N
.NET languages documentation, B-4
network troubleshooting, 1-14
NI-DAQmx documentation, B-2
O
on-demand edge counting, 5-3
output signals, minimizing glitches, 3-6
P
pause trigger, 5-38
period measurement, 5-18
PFI, 4-13
BNC connectors, 1-30
filters, 4-13
position measurement, 5-19
buffered, 5-21
power connector, 1-30
POWER LED, 1-26
prescaling, 5-39
pulse
encoders, 5-21
generation for ETS, 5-32
train generation, 5-25
continuous, 5-27
pulse-width measurement, 5-5
implicit buffered, 5-6
single, 5-6
Q
QoS priority, 1-15
quadrature encoders, 5-19
R
rebooting, 1-30
reciprocal frequency measurement, 5-12
regulatory information, A-1
related documentation, B-1
reserving the chassis in MAX, 1-15
reset button, 1-30
retriggerable single pulse generation, 5-26
S
sample clock
edge counting, 5-4
measurement, 5-21
semi-period measurement, 5-9
implicit buffered, 5-10
single, 5-9
simple pulse generation, 5-24
single
point edge counting, 5-3
pulse generation, 5-24
retriggerable, 5-26
with start trigger, 5-25
pulse-width measurement, 5-6
semi-period measurement, 5-9
two-signal edge-separation
measurement, 5-22
software-timed generations
analog output, 3-1
digital output, 4-8
start trigger, 5-38
STATUS LED, 1-26
STC3, 1-33
synchronization modes, 5-39
100 MHz source, 5-39
external source less than 40 MHz, 5-40
internal source less than 40 MHz, 5-40
T
technical support, B-4
training, B-4
To Next Page
Loading...
