Other Equipment
There are several required items not included in your device kit that you need to operate the
NI 4112/4113. Your application may require additional items not included in your kit to install
or operate your device.
Required Items
• A PXI Express chassis and chassis documentation. For more information about
compatible chassis options, refer to ni.com.
• A PXI Express embedded controller or MXI controller system that meets the system
requirements specified in this guide and chassis documentation.
Optional Items
• NI screwdriver (part number 781015-01).
Preparing the Environment
Ensure that the environment you are using the NI 4112/4113 in meets the following
specifications.
Operating Environment
....................................................................Ambient temperature range 0 °C to 55 °C (Tested in accordance with
IEC 60068-2-1 and IEC 60068-2-2. Meets
MIL-PRF-28800F Class 3 low temperature
limit and MIL-PRF-28800F Class 2 high
temperature limit.)
....................................................................Relative humidity range 10% to 90%, noncondensing (Tested in
accordance with IEC 60068-2-56.)
............................................................................Storage ambient temperature range -40 °C to 70 °C (Tested in accordance
with IEC 60068-2-1 and IEC 60068-2-2.)
............................................................................Maximum altitude 2,000 m (800 mbar) (at 25 °C ambient
temperature)
............................................................................Pollution Degree 2
Indoor use only.
Note Refer to the device specifications on ni.com/manuals for complete
specifications.
4 | ni.com | NI PXIe-4112/4113 Getting Started Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
