National Instruments PCI-8430 - Page 164

HowdoIforceWindowstodetectmyPCI,PXI,
orPCMCIAhardware?
Ifyourserialhardwaredoesnotshowupinthedevicemanager,
Windowsdidnotdetectyourhardware.Tosolvethisproblem,complete
thefollowingsteps:
1. SelectStart»ControlPanelanddouble-clicktheSystemicon.
2. SelecttheHardwaretabandclicktheDeviceManagerbutton.
3. Double-clicktheMultifunctionAdaptersicon.
4. FromtheMultifunctionadapterslist,right-clicktheNational
Instrumentsinterfacethatwasnotdetected,asshowninthe
followingfigure.(ThisexampleshowsaPCIinterface.)
SelectinganInterfacetoUninstall
5. ChoosetheUninstalloption.
6. IntheConfirmDeviceRemovaldialogbox,clicktheOKbutton
toremovethehardwareinformation.