National Instruments PCI-8430 - Verifying the Hostname

VerifyingtheHostname
Tocorrectaproblemwiththehostname,completethefollowingsteps:
1. Locatethedevicethathasaproblem.Thisisindicatedbyan(!)
onthedeviceicon,asshownintheNIEthernetDevice
Configurationutility.
2. SelectProperties....Adialogboxsimilartothefollowingappears.
ResolvingaHostnameVerificationError
3. Theutilitygivesyoufouroptionsforresolvingtheverification
error.SelecttheonethatbestfitsyoursituationandclickOK.
Changethedevice'shostnametomatchtheDNSentry.
Usethisoptionifyouwanttoacceptthehostnamethe
DHCPserverassigns,orifyoucannotcontactthenetwork
administratortochangetheDNSentry.
UsestaticnetworkparametersinsteadofDHCP.Use
thisoptionifyoucannotusethehostnametheDHCP
serverassigns.Contactyournetworkadministratorto
obtainavalidIPaddress,subnet,andgateway.Thisoption
disablesDHCPonthedevice.
Editthecurrenthostname.Usethisoptiontochangethe
hostnametoanameotherthaneithertheconfigured
hostnameorthenametheDHCPserverassigns.Contact
yournetworkadministratortoobtainavalidname.