EasyManua.ls Logo

National Instruments PCI-8430 - Page 85

National Instruments PCI-8430
237 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
UsingStaticIPParameters
IfDHCPisnotavailable,youmustprovidetheserialENETinterfacewith
severalimportantnetworkparameters.Theseparametersarelisted
below.
IPaddress—Theunique,computer-readableaddressofadevice
onyournetwork.AnIPaddresstypicallyisrepresentedasfour
decimalnumbersseparatedbyperiods(forexample,
130.164.54.20).RefertoChoosingaStaticIPAddress.
Subnetmask—Acodethathelpsthenetworkdevicedetermine
whetheranotherdeviceisonthesamenetworkoradifferent
network.
GatewayIP—TheIPaddressofadevicethatactsasagateway,
whichisaconnectionbetweentwonetworks.Ifyournetworkdoes
nothaveagateway,setthisparameterto0.0.0.0.
DNSServer—TheIPaddressofanetworkdevicethatstores
hostnamesandtranslatesthemintoIPaddresses.Ifyournetwork
doesnothaveaDNSserver,setthisparameterto0.0.0.0.

Related product manuals