National Instruments PXI User Manual

NI 5114 Calibration Procedure | © National Instruments | 3
Documentation
Consult the following documents for information about the NI PXI/PXIe/PCI-5114, NI-SCOPE,
and your application software. All documents are available on
ni.com, and the Help files install
with the software.
IVI\Drivers\niScope\
niScopeCal.fp
CVI function panel file that includes external
calibration function prototypes and help on using
NI-SCOPE in the CVI environment.
IVI\Include\niScopeCal.h Calibration header file, which you must include in
any C program accessing calibration functions.
This file automatically includes
niScope.h,
which defines the rest of the NI-SCOPE interface.
IVI\Drivers\niScope\
Examples
Directory of NI-SCOPE examples for CVI, C,
Visual C++, and Visual Basic.
NI High-Speed Digitizers Getting Started Guide
Contains: NI-SCOPE installation, hardware installation, and hardware programing
NI 5114 Specifications
Contains: NI PXI/PXIe/PCI-5114 specifications and calibration interval
NI-SCOPE Readme
Contains: Operating system and application software support in NI-SCOPE
NI High-Speed Digitizers Help
Contains: Detailed information about NI PXI/PXIe/PCI-5114
NI-SCOPE LabVIEW Reference Help
Contains: LabVIEW programming concepts and reference information about NI-SCOPE VIs
and functions
NI-SCOPE Function Reference Help
Contains: Reference information for NI-SCOPE C functions and NI-SCOPE C properties
Table 2. Calibration File Locations after Installing NI-SCOPE (Continued)
File Name and Location Description

National Instruments PXI Specifications

General

Number of Slots	Varies by chassis (4, 8, 18)
Power Supply	Varies by chassis (typically AC or DC input)
Operating System Support	Windows, Linux
Typical Applications	Automated test, data acquisition
Compatibility	PXI
Cooling	Forced air
Operating Temperature	0 °C to 55 °C (Varies by module and chassis)
Relative Humidity	10% to 90% noncondensing (Varies by module and chassis)