© 2014 National Instruments. All rights reserved.
374380A-01 Aug14
Refer to the NI Trademarks and Logo Guidelines at ni.com/trademarks for more information on National Instruments trademarks. Other
product and company names mentioned herein are trademarks or trade names of their respective companies. For patents covering National
Instruments products/technology, refer to the appropriate location: Help»Patents in your software, the patents.txt file on your media, or the
National Instruments Patents Notice at ni.com/patents. You can find information about end-user license agreements (EULAs) and third-party
legal notices in the readme file for your NI product. Refer to the Export Compliance Information at ni.com/legal/export-compliance
for the National Instruments global trade compliance policy and how to obtain relevant HTS codes, ECCNs, and other import/export data. NI MAKES
NO EXPRESS OR IMPLIED WARRANTIES AS TO THE ACCURACY OF THE INFORMATION CONTAINED HEREIN AND SHALL NOT BE LIABLE FOR
ANY ERRORS. U.S. Government Customers: The data contained in this manual was developed at private expense and is subject to the applicable
limited rights and restricted data rights as set forth in FAR 52.227-14, DFAR 252.227-7014, and DFAR 252.227-7015.
NI-SCOPE
NI-SCOPE provides a full complement of calibration utility functions and VIs. Refer to the
NI High-Speed Digitizers Help for the complete function reference and VI reference. The utility
functions include:
• niScope_CalChangePassword (niScope Cal Change Password VI)
• niScope_CalFetchCount (niScope Cal Fetch Count VI)
•
niScope_CalFetchDate (niScope Cal Fetch Date VI)
•
niScope_CalFetchMiscInfo (niScope Cal Fetch Misc Info VI)
• niScope_CalFetchTemperature (niScope Cal Fetch Temperature VI)
•
niScope_CalStoreMiscInfo (niScope Cal Store Misc Info VI)
Where to Go for Support
The National Instruments website is your complete resource for technical support. At ni.com/
support
you have access to everything from troubleshooting and application development
self-help resources to email and phone assistance from NI Application Engineers.
Visit
ni.com/services for NI Factory Installation Services, repairs, extended warranty, and
other services.
Visit
ni.com/register to register your National Instruments product. Product registration
facilitates technical support and ensures that you receive important information updates from NI.
A Declaration of Conformity (DoC) is our claim of compliance with the Council of the European
Communities using the manufacturer’s declaration of conformity. This system affords the user
protection for electromagnetic compatibility (EMC) and product safety. You can obtain the DoC
for your product by visiting
ni.com/certification. If your product supports calibration,
you can obtain the calibration certificate for your product at
ni.com/calibration.
National Instruments corporate headquarters is located at 11500 North Mopac Expressway,
Austin, Texas, 78759-3504. National Instruments also has offices located around the world. For
telephone support in the United States, create your service request at
ni.com/support or dial
512 795 8248. For telephone support outside the United States, visit the Worldwide Offices
section of
ni.com/niglobal to access the branch office websites, which provide up-to-date
contact information, support phone numbers, email addresses, and current events.
To Previous Page
Loading...
Need help?
General
