Note Do not install a module if it appears damaged in any way.
3.
Unpack any other items and documentation from the kit.
Store the module in the antistatic package when the module is not in use.
Verify the Kit Contents
The following items are necessary to set up and use the PXIe-446x.
■
PXIe-446x analog input/output module
■
Module Safety, Environmental, and Regulatory Information document
Other Equipment
The following additional items, not included in the module kit, are necessary to
operate the PXIe-446x.
■
PXI Express chassis with
■
controller, or
■
MXI-Express (card or built-in)
■
(optional) LabVIEW
Note For the list of LabVIEW versions supported by a specific version
of NI-DAQmx, refer to the NI-DAQmx Readme, available on the version-
specific download page at
ni.com/downloads.
Preparing the Environment
Refer to the module Safety, Environmental, and Regulatory Information
document shipped with your device for the environmental specifications required
for the PXIe-446x.
ni.com
4
PXIe-4466/4467/4468 Getting Started Guide
To Next Page
Loading...
Need help?
General
