National Instruments PXIe-8267 Getting Started Guide

2. Be sure the Foreign disk group (4 of 4 disks) checkbox is enabled and click OK.
3. You may see the following dialog box if a RAID volume was present on the PXIe-8267
before you moved it to the new system. Click OK to allow the new system to import the
RAID volume. The initial data is preserved and will be readable in the new system.
PXIe-8267 Getting Started Guide | © National Instruments | 9

National Instruments PXIe-8267 Specifications

General

Brand	National Instruments
Model	PXIe-8267
Category	Control Unit
Language	English