Native Instruments Audio 2 DJ - Tкфлещк Setup with a DJ-Controller

AUDIO 2 DJ – 29
7.2.2 TRAKTOR Setup with a DJ-Controller
1. Complete the steps described in section 7.2.1 “Laptop-Only TRAKTOR Setup.”
2. Connect your DJ controller to a USB port on your computer.
To use the AUDIO 2 DJ with a DJ-controller, connect the devices as pictured above.
3. Start TRAKTOR.
4. Select the Start Setup Wizard entry from TRAKTOR’s Help menu.
5. From the Setup Wizard’s upper drop-down menu, select the manufacturer of the DJ
controller you want to use.
6. From the Setup Wizard’s lower drop-down menu, select your DJ controller’s product
name.
7. Click apply. The Setup Wizard will now load the MIDI mappings for the DJ controller
you selected.
8. You should now be able to control TRAKTOR with your DJ controller. You can test this
by pressing buttons or moving faders on the DJ controller.