Digital Performers mixer and directly to your sound card. If the plug-in does
not receive MIDI or generate audio, then make sure to check the following
two areas:
• Make sure MIDI Patch Through is enabled in the Studio menu of
Digital Performer.
• The MIDI channel of your MIDI track must correspond to the receive
channel of the loaded instrument.
• Make sure that the instruments track output is correctly set.
• Make sure that you have properly congured your sound card for use
with Digital Performer.
(please refer to your Digital Performer manual for more information).
Use in Garage Band
• Launch Garage Band
• Press the “+” button to create a new “Software Instrument” Track.
From here you can choose the icon you wish to use.
• Double-click the instrument track icon or press the “I” icon to get
the Track Info.
• From the Info window expand the Details triangle underneath the
Instrument icon to expose the track settings.
• From the Generator drop-down menu, choose B4 II from among Audio
Unit plug-ins.
• Clicking on the pencil icon next to the “Manual” drop-down menu
will open the B4 II interface for editing.
• B4 II can now be played using an external MIDI keyboard.
To Next Page
Loading...
Need help?
General
