Native Instruments B4 II User Manual

B4 II – 35
DXi 2 plug-in
DXi is a Microsoft DirectX technology based plug-in format
Use in Sonar 4
• Launch Sonar
• In the synth rack choose B4 II DXi 2.
Loading the DXi 2 plug-in in the synth rack
• Route a MIDI track to the DXi 2-Plug-in by selecting B4 II in the Out
drop down list.
Assign a MIDI track to the B4 II -DXi-Plug-in
After having loaded an Instrument from the library you should be able to trig-
ger it via MIDI using a keyboard controller. B4 II’s sound will generate through
Sonar’s mixer and directly to your sound card. If the plug-in does not receive
MIDI or generate audio, then make sure to check the following two areas:
• Make sure MIDI Patch Through is enabled in the Studio menu of
Sonar.
• The MIDI channel of your MIDI track must correspond to the receive
channel of the loaded instrument.
• Make sure that the instruments track output is correctly set.
• Make sure that you have properly congured your sound card for use
with Sonar.
(please refer to your Sonar manual for more information).

Native Instruments B4 II Specifications

General

Brand	Native Instruments
Model	B4 II
Category	Musical Instrument
Language	English