In standalone mode the external signal comes from the audio input of your
soundcard. Please refer to the Setup View section of this manual for more
information.
The FX plugin version of B4 will receive audio input from the host software
it is running in. Please refer to the respective section of this manual and to
the documentation of your sequencer or plugin host for information on how
to route audio into the B4 FX plugin.
The B4 is not only an organ but a full-edged simulation of a tube amp and
rotator rig including a variety of classic cabinets and microphones. Electric
guitars will feel right at home when plugged into the B4.
Feel free to experiment and use synthesizers, vocals or whatever audio signal
you have. You will get a plethora of nice sounds from this approach.
Setup View
The technical MIDI side of the B4…
To Next Page
Loading...
Need help?
General
