2 Quickstart
In this chapter, you will find a quick guide to navigating the controls of STUDIO DRUMM
ER, as well as step by step guides to certain functions.
2.1 Basic Navigation
The interface has four main pages of control. You can navigate among these pages by
clicking on the tabs at the bottom of the instrument's Performance View. The different pa
ges and their uses are as follows:
▪ Grooves page: On this page is a browser of many genre-separated MIDI grooves and
fills with variations that can be dragged to your host for immediate song creation.
▪ Options page: This page has options for technical kit settings such as kit mapping and
velocity options, as well as randomization parameters.
▪ Kit page: You can select each drum on this page to adjust the overhead and room mix
es, tuning, and volume envelopes for those drums. You can also select which snare
you want to use, as well as load and unload the separate kit pieces.
▪ Mixer page: This page has all of the standard controls for an audio mixer, including
levels, panning, solo, mute, send levels and channel routing. This is also where all ef
fect settings and effect routing options are edited.
The four navigation tabs at the bottom of the Performance View
2.2 Editing the Drums
2.2.1 Fine-Controlling Individual Drums and Articulations
To change the individual kit piece's sound settings and articulations:
1.
Click on the Kit tab.
2. To edit the settings for a particular drum or cymbal, just click on its picture. Percus
sion is selected from a sub-menu of icons next to the drum kit image.
3. To change the overhead and room mix amounts for each piece, adjust the correspond
ing OH MIX and ROOM MIX knobs.
4.
To alter the tuning, adjust the TUNE knob.
Quickstart
Basic Navigation
STUDIO DRUMMER - Manual - 8
To Next Page
Loading...
