Need help?Do you have a question about the NAUTICAST B2 and is the answer not in the manual?
General| Brand | NAUTICAST |
|---|---|
| Model | B2 |
| Category | Marine Radio |
| Language | English |
Differentiates between Class-A and Class-B AIS units and their applications.
Details how AIS units determine vessel position using satellite networks like GPS.
Lists box contents, software prerequisites, and initial PC connection for configuration.
Covers mounting, connecting antennas, power, and performing an installation check.
Instructions for connecting to a PC via USB or serial, and to other devices via NMEA 0183.
Details on using the data cable for alarm relays, silent mode, and external LEDs.
Explains the meaning of PWR, TX, ERR, CH1, and CH2 LEDs for system status.
Information on NMEA 0183 data messages and requirements for GPS/VHF antennas.
Lists the European R&TTE directive and other standards the B2 complies with.
Advises on cleaning, warns against opening the unit, and notes no user-serviceable parts.
Lists detailed product number, size, power consumption, interfaces, and LEDs.
Specifies when the device transmits position and static data reports.
Visual representation of the AIS system's components and connections.
Detailed pin assignments and wiring for power and data cables.
Technical drawings showing the physical size and mounting dimensions of the unit.
Drawings and specifications for the GPS antenna and its mounting hardware.
Drawings and specifications for the VHF antenna.
Official document confirming compliance with European R&TTE directive.
Certificate of type approval from the German Federal Maritime and Hydrographic Agency.
Step-by-step guide to diagnose and resolve common operational issues using LED indicators.
To Next Page
