82
14. The Console will now ash the 100% Congured Value. The 100%
Congured Value is the previously calibrated position for the 100%
Resistance Value.
With one hand on the front of the Flywheel, slightly turn the Flywheel
while turning the Resistance Knob clockwise. Immediately stop turning the
Resistance Knob when the Flywheel is unable to turn.
Be sure to keep ngers clear of all pinch hazards as you
slightly turn the Flywheel.
15. Turn the Resistance Knob counter-clockwise one full turn.
16. Conrm that the Flywheel can move by turning it. If the Flywheel
cannot turn, the Resistance Knob has been turned too far. Go back to
Step 14.
17. Push the START/ENTER button to set this value as the new 100%
Congured Value. The Console will update the displayed value.
18. Unplug the machine from the power adapter for 5 minutes, and then
plug it back into the machine. The Console will activate with the Magnetic
Resistance Sensor calibrated to the new positions.
19. Final Inspection
Inspect your machine to ensure that all hardware is tight and components
are properly assembled.
Do not use until the machine has been fully assembled and
inspected for correct performance in accordance with the
Owner’s Manual.
Resistance Knob
Flywheel
To Next Page
Loading...
Need help?
General
