Nautilus Mobia - Page 23

23
#2
P
X16
X4
R
#2
P
X16
X4
R
10. Remove the 4 screw plugs (R) .
11. Remove the 16 indicated retaining screws(P) from each side using a Phillips
screwdriver.
12. Remove the outer Upright Covers by pulling at the center and flexing outward.
Set them aside.
13. Remove the lower Cylinder bolt using a 5 mm hex wrench.
14. Swing the Cylinder to the side while supporting the Treadle with one hand.
Lower the Treadle.