Nautilus Mobia - Replacing the Walking Belt

25
Replacing the Walking Belt
!
To reduce the risk of electrical shock, always unplug the power cord and wait 5 minutes before cleaning, maintaining or repairing this machine.
Tools Required: #2 Phillips Screwdriver, (2) 13 mm wrenches, 5 mm hex wrench, 10 mm socket
1. Follow Treadle Assembly Removal procedures to remove Treadle Assembly. THIS STEP REQUIRES TWO PEOPLE.
19. Remove the Treadle Assembly from the tness machine. THIS STEP REQUIRES
TWO PEOPLE.