Nautilus NR 2000 - Seat Back Cover

ASSEMBLY INSTRUCTIONS
STEP 5: Installing the Seat Bottom and
Seat Back
Attach the seat bottom (19) to the seat handle assembly (17) with 4 - 20mm socket
head cap screws (22), 4 – spring washers (4) and 4 - washer (5).
Attach the seat back (20) to the seat back support assembly (16)
with 4 – 20mm socket head cap screws (22), 4 – spring washers (4) and 4 –
washers (5)
Attach the seat back cover (21) to the seat back support assembly (16) with 3
– 12mm flat head screws (14).
20
19
17
5
4
22
4
21
14
16
22
5