Nautilus ONE Service Manual

Nautilus ONE™ Tower Shroud Removal (cont.)
Remove the Outside Shroud
Note: The large round bezel does not need to be removed from
the outside shroud.
4-1 Lift the shroud up until the tabs stop at the top of the
P-slot (Figure 5).
NOTICE: Do not attempt to remove shroud by prying with any
kind of tool.
4-2 Pull shroud outward to remove from the P-slots (Figure 6).
Remove the Inside Shroud
5-1 Remove the center cap behind the dial. Adjust the dial to
the lowest setting and lift the dial up and out of the way.
Unsnap the center cap out of the shroud opening tabs
(Figure 7).
5-2 Lift the shroud up until the tabs stop at the top of the
P-slot.
5-3 Pull the shroud outward to remove it from the P-slots
(Figure 8).
P-Slot
Figure 5
Service Procedures
Figure 6
Figure 7
Figure 8
Service Manual
6

Nautilus ONE Specifications

General

Target Muscles	Full Body
Usage	Home
Frame Material	Steel
Type	Elliptical
User Interface	LCD
Display	LCD
Heart Rate Monitoring	Yes
Resistance System	Eddy Current Brake (ECB)