Nautilus U624 - Product Specifications and Pre-Assembly Guidance

5
SPECIFICATIONS
41.8” (104cm)
21.6” (55cm)
57.6” (146cm)
Maximum User Weight: 136 kg (300 lb)
Total Surface Area (footprint) of equipment: 5720 cm
2
(902.9 in
2
)
Machine Weight: 30.9 kg (68.1 lb)
Power Requirements:
Operational Voltage: 9 VDC
Operating Current: 1.5A
AC Power Adapter: 220V - 240V AC, 50H
Complies with the following:
ISO 20957 compliant.
DO NOT dispose of this product as refuse. This product is to be recycled. For proper disposal of this product,
please follow the prescribed methods at an approved waste center.
Before Assembly
Select the area where you are going to set up and operate your machine. For safe operation, the location must be on a
hard,levelsurface.Allowaworkoutareaofaminimum2.3mx1.8m(90”x70”).
Basic Assembly Tips
Follow these basic points when you assemble
your machine:
• Read and understand the “Important Safety
Instructions” before assembly.
• Collect all the pieces necessary for each
assembly step.
• Using the recommended wrenches, turn
the bolts and nuts to the right (clockwise) to
tighten, and the left (counterclockwise) to
loosen, unless instructed otherwise.
• When attaching 2 pieces, gently lift and look
through the bolt holes to help insert the bolt
through the holes.
• The assembly requires 2 people.
0.6m
24”
1.8m
70”
2.3m
90”
0.6m
24”
0.6m
24”
0.6m
24”