5
Leveling the Machine
Levelers are found on each side of the Rear Stabilizer and on the Frame Rail. On the Rear Stabilizer, turn the stabilizer
foot to adjust.
Do not adjust the levelers to such a
KHLJKWWKDWWKH\GHWDFKRUXQVFUHZ
from the machine. Injury to you or
damage to the machine can occur.
To adjust the leveler on the Frame Rail:
1. Loosen the upper locking nut.
2. Turn the leveler to adjust the height.
3. Tighten the upper locking nut to lock the
leveler.
Make sure the bike is level and stable before
\RXH[HUFLVH
Moving the Machine
The machine may be moved by one or more persons depending on their physical abilities and capacities.
Make sure that you DQGRWKHUVDUHDOOSK\VLFDOO\¿WDQGDEOHWRPRYHWKHPDFKLQHVDIHO\
1. Remove the power cord.
2. Use the Transport Handle to carefully lift the machine onto the
transport rollers.
3. Push the machine into position.
4. Carefully lower the machine into position.
NOTICE: Be careful when you move the bike$EUXSWPRWLRQVFDQDႇHFWWKH
computer operation.