Do you have a question about the Navien NP-210A and is the answer not in the manual?
Brand | Navien |
---|---|
Model | NP-210A |
Category | Water Heater |
Language | English |
Explains hazard levels (Danger, Warning, Caution) and their meanings.
Lists critical safety measures to prevent hazards like fire, explosion, and injury.
Introduces Navien Regular (NR) and Navien Premium (NP) series, including 'A' models.
Identifies and lists parts for the NR-A model with Navien Part Numbers.
Identifies and lists parts for the NR model with Navien Part Numbers.
Identifies and lists parts for the NP-A model with Navien Part Numbers.
Identifies and lists parts for the NP model with Navien Part Numbers.
Provides key technical specifications like heat capacity, dimensions, and gas type for models.
Details the physical dimensions of NR-A/NP-A and NR/NP models with diagrams.
Illustrates the internal workings and fluid paths of various Navien models.
Visually represents the sequence of operations and logic for the water heater.
Explains the function and configuration of DIP switches on the PCB for mode selection.
Shows electrical connections for different models (NR-A, NP-A, NR, NP).
Identifies specific points on the PCB for electrical testing and troubleshooting.
Details critical components like PCB, thermal fuse, fan motor, gas valve, and flow sensor.
Lists error codes and their primary reasons and basic actions.
Details specific error codes, their causes, and diagnostic/resolution steps.
Lists necessary precautions and tools for performing a water heater inspection.
Step-by-step guide for checking the water heater's inlet gas pressure.
Procedure for adjusting the gas-air mixture for optimal combustion.
Instructions for draining water from the waterway and condensate siphon.
Guide for cleaning the air intake filter located near the fan.
Procedure for flushing the heat exchanger with a cleaning solution.
General precautions and steps before disassembling and replacing parts.
Guides for replacing critical components like PCB, fan motor, gas valve, and flow sensor.
Provides a checklist for recording results of annual inspections.
Provides a checklist for recording results of maintenance tasks.