Qube 300 | Installation Manual
16
7 Specifications
Physical
• Weight: 320 g
• Packed Weight (Gift Box): 600 g
• Case Material: Bayer KU2 1514
ABS/Polycarbonate blend
• Tamper Cover: Polycarbonate
Power Supply
• Nominal operating voltage: 12 or 24 V
vehicle supplies
• Minimum operating voltage: 8 V DC
• Maximum operating voltage: 30 V DC
Current Consumption at 13.8 V (27.6 V)
• Sleep State: <3 mA @ 12 V DC
• Awake, modem ON: 70 mA (35 mA)
• Awake, average transmit event once
every one minute: 120 mA (60 mA)
• Peak transmit current: 250 mA (130
mA)
• Battery charging: additional 150 mA (80
mA)
Digital Inputs
• Input Voltage LOW: <1.0 V (Active High
mode) Input Voltage HIGH:
>5.0 V (Active High mode) Input
Voltage LOW: <0.2 V (Active Low
mode)
• Input Voltage HIGH: >0.5 V or not
connected (Active Low mode)
• Absolute Maximum Voltage: 33 V
(Independent of supply)
Analogue Input
• Voltage Range: 0-33 V DC
• ADC Resolution: 12 bit
• Absolute Maximum Voltage: 40 V DC
Digital Output
• Maximum sink current 250 mA (over
current protection/shut-off)
Temperature Monitoring
• Maximum of six Navman Wireless digital
temperature probes
• Maximum 30 m cable length per
installation
EMC Compliance
• EN 301 489-7 V1.3.1 (2002-08)
• EN 301489-19 V1.2.1 2002
• AS/NZS CISPR 22.2006
• AS/ANZ 60950. 1:2003 Amdt 1:2006
Amdt 2:2008 Amdt 3:2008
• ISO 7637-3:1995, ISO 7637-2:2004,
ISO11452:2004, ISO 11452-4:2005
• FCC: Part 15 class A & B
Serial Interface
• RS232 x 3
Environmental
• Storage Temperature: -40 to +85°C
(-40 to +185°F)
• Operational Temperature: -20 to +70°C
(-4 to +158°F)
• IP Rating: IP4X
• Humidity: SAE J1455 Vibration: SAE
J1455
• Shock: 20G 10mS
Ignition Input
• Absolute Maximum Voltage: 33 V
(independent of supply)
To Next Page
Loading...
Need help?
General
