Page 4 Naxa Electronics
Installing Your Sound Bar
On a Table Top How to Mount the Sound Bar to a
Wall
You will need the following:
• Wall mounting kit (2 screws, 2 drywall
plugs)
• Pencil
• Level
• Ruler
• Drill (for drywall installations only)
• Hammer (for drywall installations only)
• Cross-head screwdriver
(the following accessories are not included)
2-3inches
2-3inches
When placing the Sound Bar on an entertainment
center, bookshelf, or any type of enclosed space,
be sure to allow at least 2-3 inches of space around
the Sound Bar for ventilation. If the Sound Bar is
enclosed in a tight space without adequate ventila-
tion, heat generated by the Sound Bar could produce
a potential heat hazard.
Find a flat and level surface to palce your sound bar.
Most people position the sound bar centered below
their TV.
Each installation environment is unique and has its
own requirements; you may need additional material
to prepare the sound bar for mounting.
To Next Page
Loading...
