EasyManua.ls Logo

NBN connection box - Outdoor Equipment Maintenance Guidelines

Default Icon
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
© 2015 nbn co ltd | ABN 86 136 533 741
ALARM
SILENCE
SYSTEM
STATUS
BATTERY
POWER
REPLACE
BATTERY
ALARM
SILENCE
BATTERY
EMERGENCY
USE
Do not cover or paint any part of the nbn
connection
box, or Power Supply (with or without Battery Backup).
The only item that can be safely painted is the removable
front cover that goes over the nbn
connection box. This
has been specifically designed to allow you to paint it.
Remove the front cover before painting it. Only use
acrylic (PVA) water-based paints.
Do not unplug the nbn
connection box or its power
supply unless you need to replace the battery in a Power
Supply with Battery Backup unit if you have one, or if
you are going away for an extended period or otherwise
directed to do so by your service provider.
Do not place objects on top of the nbn
connection box,
as this may reduce minimum ventilation requirements,
causing your nbn
connection box to operate at a higher
temperature than normal.
Outside your property
Ensure you know where any underground cables are
located before digging to avoid accidental damage to them.
It is best to always contact Dial Before you Dig by calling
1100 or via their website at www.1100.com.au. Lodging
an enquiry is free of charge. You may incur costs if
underground cables are accidentally damaged, and
experience lengthy unplanned service disruptions until
the damaged cables can be repaired.
Keep branches and shrubs away from the fibre optic cable
and nbn
utility box.