30
Personal Setup
We looked at hundreds of trekking bikes and none were like the
other. The individuality in the personal use is unique. We love cy-
cling! We cyclists are individualists, there will be no standard so-
lution. That is why we recommend the following assembly variants
with the certainty that there will be many solutions.
NC-17 bag (optional article no. 4079)
NC-17 A-Headset (optional article no. 4083)
NC-17 bottle holder (optional article no. 4028) not suitable if you
plan to cross deep brooks and rivers IP68!
Whatever you want to design your setup: Please note that the USB
socket must hang freely downwards to prevent rain from entering
and accumulating. Also avoid unprotected mounting in the splash
area of the front wheel, gold contacts do not like mud!
Example setup in a bag
Example setup in a bag Think about how you want to carry the AP-
PCON 3000 on your bike. Think about where you want to connect
the two cables from the APPCON 3000. For example, outside a
bag or inside a bag. Think about whether you always leave the bag
on the wheel (xed installation) or whether you always want to take
the bag with you.
For a xed mounting of the bag, it makes sense to connect the
cables in the bag. Do you want to take the bag, it is faster to con-
nect the connectors outside the bag. In principle, it is of course
advisable to make all the connections in the bag to be protected
from rain. We recommend that you rst organize the cable routing
and only then install the cable ties to x the dynamo cable.
To Next Page
Loading...