25
APPCON 3000
assembly instruction
Please also watch installation videos www.APPCON3000.de
The APPCON 3000 was designed and built by Dipl. Ing. Thomas
Treyer and master bicycle mechanic Udo Ochendalski. This unique
product sets the standard in the still new category of dynamo char-
gers on bicycles. As a small company we are dependent on your
help. If the shoe pinches you, please do not hesitate to call us
(02234 94 94 000) or send us an e-mail to Info@NC-17.de. We
will respond immediately. Your satisfaction is very important to us
personally. For us, negative and unqualied online reviews are un-
derstandably useless. Neither do they save the world with it, nor do
they improve the product! If unexpected tasks arise that make you
dissatised, please contact me personally before you get grey hair!
I will clarify this immediately! Promised! Udo@ NC-17.de.
Important note
Please always use the APPCON 3000 together with the carbon
protection tube, The wall thickness of the aluminium housing is
very thin to allow A-Headset mounting. A transport or use without
protection Case can and will probably lead to small dents on the
APPCON case after some time. This is not a warranty case. Please
use the supplied carbon protection tube.
Vers. 1.1
To Next Page
Loading...