44
CON 3000 is charged, the LED changes to green. Are you curious?
You can use our app on your smartphone during the charging pro-
cess and have the charge status of the battery displayed in per-
cent. After you have disconnected the APPCON from the mains
plug, it automatically goes into the tent sleep mode.
Note: If the APPCON 3000 is charged via USB, its USB output is
switched off. So you cannot load another USB device at the same
time as the APPCON 3000 itself is being loaded via USB.
For more information follow our blog: www.APPCON3000.de
Intended Use
The APPCON 3000 charging electronics harvests the alternating
current from its standard bicycle hub dynamo in order to convert
it into direct current. The connection to other voltage sources, e.g.
a mains transformer or a motor vehicle alternator, is considered
improper and can lead to damage or injury.
The Powerbank integrated in the APPCON 3000 is exclusively in-
tended for the power supply of devices with a USB operating vol-
tage of 5 V to max. 2 Ampere direct current (mobile phones, navi-
gation devices, tablets etc.). Any other use or use beyond this is
considered improper and can lead to damage and injury.
Claims of any kind for damage resulting from improper use are
excluded.
Maintenance and cleaning
Never use aggressive and abrasive cleaning agents, cleaning alco-
hol or other chemical solutions, as these can attack the housing or
even impair its function. The product is maintenance-free for you,
never disassemble it. The battery is permanently installed and may
only be replaced by NC-17. Disconnect the product from the power
To Next Page
Loading...