NC SW6 - Page 23

23
Service Schedules
DUMPER CHASSIS
Grease Points
Operation 10
Hr
50
Hr
100
Hr
500
Hr
1000
Hr
Skip Pivot Pins (2 No Pins) ●
Slew ring (4 No Points) ● ●
Tipping Ram Pins (2 No Pins) ●
Slew Rams (2 No Points) ●
Drive Shafts (3 No Points) ● ●
Skip Stopper Flap (1 No Point) ●
Centre Point Articulation (3 No Points) ●
Steering Ram (2 No Points) ●
Note: First 50 Hr Service only.
HYDRAULICS SYSTEM
Service Points & Fluid Levels
Operation 10
Hr
100
Hr
500
Hr
Return to tank filter element Change ● ●
Pressure filter element* Change ● ●
Suction strainer (wash with paraffin if necessary) Check ● ●
Inspect return to tank filter indicator Check ●
Note: First 100 Hr Service only.
Note: Every 10 hours.
* only valid to Serial No: 032067
AIR INDUCTION SYSTEM
Operation 10
Hr
Check air filter restriction indicator Check ●
Note: Every 10 hours.