NCR Orderman7 User Manual

Fehler! Kein Text mit angegebener Formatvorlage im Dokument. User Guide V01.06
Operating the Service Station and Multi Service Station
Orderman GmbH (Part of NCR Corporation) 31
11.1.1 Charging the handheld
The handheld unit can be charged by plugging it into the service station or multi service station.
Note: To place the handheld unit in the service station or multi service station, you
must first remove the safety cord!
Fig. 20: Handheld in service station
 Handheld
 Service station
 Additional battery pack
Note: In addition to the handheld unit, an additional battery pack can also be
charged in the fast-charging slot.
Handheld status LED
Status
LED blue
Handheld is in boot process (startup)
LED flashes green
Battery is charging
LED green
Battery is charged
LED red
Battery is not charging (see Troubleshooting section)
Note: If a charged handheld or battery pack remains in the service station for a
longer period (or in a charged state in the service station or multi service
station), the solid green "Charging status LED" may start flashing again
(charging).
Cause:
The charge control ensures the battery is kept at an optimum charging
status.




NCR Orderman7 Specifications

General

Brand	NCR
Model	Orderman7
Category	Handhelds
Language	English