Fehler! Kein Text mit angegebener Formatvorlage im Dokument. User Guide V01.06
Troubleshooting
Orderman GmbH (Part of NCR Corporation) 51
17 Troubleshooting
Oxidized charging contacts
Handheld needs to be repaired*
Check the power supply to the
service station or multi service station
and power pack
Battery needs to be replaced
Battery not charging
(In the fast-charging slot)
Oxidized charging contacts
Handheld needs to be repaired*
Check the power supply to the
service station or multi service station
and power pack
Battery lock is defective
Handheld needs to be repaired*
Spring contacts are defective
Handheld needs to be repaired*
Battery needs to be replaced
Battery is not inserted correctly
Insert the battery correctly
Handheld needs to be repaired*
POS application does not start
No connection to the host
system
Process (application) hangs up
Shut down and restart your handheld
Automatic backlight too dark/light
Dirty lens on the ambient light
sensor
Clean the display with a soft cloth.
No network connection to
service station or multi service
station
(Network status LED on the
service station or multi service
station does not light up)
Network cable not plugged in
No power to the service station
or multi service station
Connect the power
(Power LED on the service station or
multi service station has to light up)
Network components (switch) is
not turned on
Switch on network components
*The handheld may only be repaired by trained service technicians.